• 4pc 1/2” Dr. Twist Socket
  • 4pc 1/2” Dr. Twist Socket
  • 4pc 1/2” Dr. Twist Socket
  • 4pc 1/2” Dr. Twist Socket
  • 4pc 1/2” Dr. Twist Socket
1 5

Projen Taiwan - Auto Tools, Hand Tools manufacturer

CAK0088B 4pc 1/2” Dr. Twist Socket

CAK0088B 4pc 1/2” Dr. Twist Socket

Size:
  • 17, 19, 21mm + 1/2”Extension driver
Feature:
  • This 1/2" DR twist socket is specially designed for the removal of locking wheel nuts.
  • This tool has 6 point and the other side with 6 point twist.
  • This tool can be also used while a nut could not be loosen in a normal way because of rust and deformation.
  • This socket set is made of SCM440 with HRC 46-49 degree.
Instruction:
  • Choose an appropriate twist socket with suitable size.
  • Put the extension driver on one side of twist socket. If operators would like to operate with the side of 6 point twist, then need to put the extension drive in the side of 12 point twist; hen operate it on a damaged nut.
  • Use a manual wrench to loose the nut anticlockwise.
  • Take the extension drive out from the twist socket.
  • Use a round bar to push the nut and take out the nut of the twist socket. If the nut could not be taken out from twist socket, then use a hammer hitting the round bar to take out the nut from twist socket.
  • Note: While operating, be sure to wear protect-glasses to protect eyes from nut fragment.
  • Safety Precaution: Do not use the impact driver.
Packaging:
  • 1Set/Pouch Bag
  • 25Set/18.8/19.8kgs/0.78'
View full details

We are also good at