• Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
1 7

Projen Taiwan

CAJ0091 TAIWAN CALIBRE Press-it Hole Puncher Kit

CAJ0091 TAIWAN CALIBRE Press-it Hole Puncher Kit

Punch hole tool

Punch hole tool: Initially, drill a 10mm pilot hole. Subsequently, select the correct cutter and mandrel. Since the process creates smooth edges, you should punch holes after painting. Furthermore, use the provided mandrels for millimeter-perfect alignment. Consequently, this professional method ensures sensors function correctly. Finally, following these steps guarantees results that meet manufacturer standards across various vehicle models.

Material:

  • CR-V steel

Feature:

  • Manufacturers designed the Press-it hole puncher kit to punch precise holes into bumpers for mounting parking sensors.
  • The sizes of the holes are different from vehicle to vehicle.
  • Previously, technicians drilled the holes using stepped drill bits. The problem is that the bumper is unusable if the hole is too deep.
  • Advantages of the kit: With the different cutters you can switch between hole sizes.
  • Thus the holes have the optimal diameter to set the parking sensors.
  • Another advantage of the Press-it System allows you to press the holes after painting the bumper.
  • The process moves the varnish toward the edges, which prevents sharp edges from forming.
  • Because of sensor sensitivity, technicians must fix them with millimeter precision to guarantee proper function.
  • By using the mandrels, which are also included in the Press-It kit, the sensors are getting assembled in a very precise way.
  • The different mandrels depending on the size of the cutters.
  • Easy and professional punching of holes, according to the requirements of most automobile manufacturer
  • With the right cutter a custom-fit hole is punched into the bumper

CAJ0091 Suitable For:

  • Punch & Mandrel Ø18.2: Supplies usual models from: BMW, Volkswagen
  • Punch & Mandrel Ø24.0: Supplies usual models from: Opel
  • Punch & Mandrel Ø26.0: Supplies usual models from: Volkswagen
  • Punch & Mandrel Ø32.0: Supplies usual models from: BMW

CAJ0091-1 Suitable For:

  • 1 x hole punch/centring mandrel set, 2-piece, Ø18.2 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø18 mm BMW/Skoda
  • 1 x centring mandrel Ø17.8 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø18.4 mm for VW
  • 1 x hole punch/centring mandrel set, 2-piece, Ø24.0 mm for Opel/Vauxhall
  • 1 x hole punch/centring mandrel set, 2-piece, Ø26.0 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø26.7 mm for VW/Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø27.4 mm for Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø28.1 mm for Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø32.0 mm for BMW
  • 1 x hole punch Ø32.5 mm for BMW (without centring mandrel, as the PDC sensor is mounted at an angle)
  • 1 x hole punch Ø38.9 mm for VW (PSA) (without centring mandrel, as the parking steering assistant sensor is mounted at an angle)
  • 1 x hole punch drive, 3/8-inch with ball bearing
  • 1 x drill bit, Ø10 mm
Packaging:
  • 1Set/Blow Mould Case
  • CAJ0091: 10Set/15/16kgs/2'
  • CAJ0091-1: 5Set/14/15kgs/1'
View full details

We are also good at